Quantity required: 1
Stock: Out of stock
Please contact us for a price
Radius Arm, Panhard Rod & A-Frame Bush Kit - Castor Adjustment
KIT0043BDJK
Caster Adjusting Kit. Kit includes SPF0194Kx1, SPF0206Kx1,SPF02559Kx1, SPF0323Kx1,SPF0129Kx1 & SPF0128Kx1 Kit Contains Castor Correction Radius Arm To Axle Bushings
Quantity required: 1
Stock: Out of stock
Price:
£431.30
Radius Arm, Panhard Rod & A-Frame Bush Kit - Standard Alignment.
KIT0043BK
Standard Alignment Kit. Kit includes SPF0194Kx1, SPF0206Kx1,SPF0126Kx1, SPF0323Kx1,SPF0129Kx1 & SPF0128Kx1. Kit includes standard alignment Radius Arm to Axle bushings
Quantity required: 1
Stock: Out of stock
Price:
£357.58
Original Shock Absorber Lower Bush only - Pin Mount.
Featuring a void in the centre of the bush design to allow lateral flexion which reduces stress on the shock absorber - a common cause of shock failure on these vehicles.
OEM Part Number: 552818
Quantity required: 1
Stock: Out of stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£26.64
OEM Part Number: 5522819
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£24.50
Radius Arm To Axle Mount Bush Kit
SPF0126K
Narrow Radius Arm - Crush tube length 48mm
Standard replacement. For Castor Correction see SPF2559K.
OEM Part Number: 575582/NRC1774
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Price:
£116.99
Tube inside diameter to suit 14mm bolt. Tube ID 14mm, 1986-on
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Price:
£38.74
Radius Arm To Chassis Mount Bush Kit
SPF0206K
Standard replacement kit. For Motorsport use SPF3632K.
Steering pull correction solutions also available - see SPF2717K & SPF2718K
OEM Part Number: NRC4514/ARN6971
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£58.61
30mm bracket width May Take Same Bush Design Front & Rear. 30mm bracket width, Measure bar diameter 19,20,22,24,25,27,30,38mm
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£32.35
30mm bracket width May Take Same Bush Design Front & Rear. 30mm bracket width, Measure bar diameter 19,20,22,24,25,27,30,38mm
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£32.35
30mm bracket width May Take Same Bush Design Front & Rear. 30mm bracket width, Measure bar diameter 19,20,22,24,25,27,30,38mm
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£32.35
Shock Absorber Upper & Lower Bush Kit
SPF1879K
After-market shock absorbers Lower Bushing Only On Rear. After-market shock absorbers
Quantity required: 2
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£23.82
Radius Arm To Axle Bush Kit - Offset for Castor Increase
SPF2559K
Alternative to SPF0126K - Narrow Radius Arm, Crush Tube length 48mm, Bush OD 51mm. Offset Bushes for Castor correction. Approx 1.5 to 2 Degrees Castor increase (Fixed position).
OEM Part Number: 575582/NRC1774
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes, 4 x Sleeves, 4 x Steel Tubes
Price:
£220.91
Radius Arm To Chassis Bush Kit - Alignment Adjustment
SPF2717K
Replacement for SPF0206K To correct slight pull to left. Change of approximately 0.5 degree in setback angle.
OEM Part Number: NRC4514/ARN6971
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£76.80
Radius Arm To Chassis Bush Kit - Alignment Adjustment
SPF2718K
Replacement for SPF0206K To correct strong pull to left. Change of approximately 1.0 degree in setback angle.
OEM Part Number: NRC4514/ARN6971
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£82.28
Radius Arm To Chassis Mount Performance Use
SPF3632K
Alternative to SPF0206K - Performance & Motorsport use only. Standard alignment
OEM Part Number: NRC4514/ARN6971
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet
Price:
£103.76
Original shock absorber Lower Bushing Only On Rear. Original shock absorber
Quantity required: 1
Stock: Out of stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£26.64
OEM Part Number: 552819
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£24.50
Upper A Arm to chassis bush
OEM Part Number: NTC1773
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Price:
£49.60
Radius Arm To Axle Mount Bush Kit
SPF0129K
OEM Part Number: NTC1772
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes
Price:
£46.45
Radius Arm To Chassis Mount Bush Kit
SPF0323K
OEM Part Number: NRC7591/NTC9027
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Plates, 2 x Polyurethane Bushes
Price:
£156.31
30mm bracket width May Take Same Bush Design Front & Rear. 30mm bracket width, Measure bar diameter 19,20,22,24,25,27,30,38mm
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£32.35
30mm bracket width May Take Same Bush Design Front & Rear. 30mm bracket width, Measure bar diameter 19,20,22,24,25,27,30,38mm
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£32.35
OEM Shock Absorber Upper Mounting. Eye Pattern mounting
OEM Part Number: NRC5593
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes
Price:
£50.76
38mm bracket width if 30mm Use SPF0666-_ _K. 38mm bracket width, Measure bar diameter 18,19 & 28.5mm available
Quantity required: 1
Stock: Out of stock
Please contact us for a price