1
Front And Rear Suspension Bush Kit
Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Kit Includes: 1xSPF3368K, 1xSPF3115K
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Kit Includes: 1xSPF3370K, 1xSPF3115K
Quantity required: 1
Stock: In Stock
Price:
£268.12
3
Complete Front Control Arm Kit
18mm Ball Joints - Up to Chassis 260
TRC1135This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 260 to 261. Vehicles with Chassis 260 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 261 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Stock: In Stock
Price:
£362.24
21mm Ball Joints - From Chassis 261
TRC1136This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 260 to 261. Vehicles with Chassis 260 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 261 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Stock: In Stock
Price:
£362.24
4
Control Arm Lower-Inner Front Bush Kit
12mm Bolt
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Price:
£83.65
14mm Bolt
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes
Price:
£83.83
5
Control Arm Lower-Inner Rear Bush
Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Price:
£199.88
Standard Alignment Settings with Bracket and Bolts
SPF4653KStandard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Brackets
Price:
£331.54
1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change
Quantity required: 1
Stock: Out of stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes
Price:
£199.88
Performance Alignment Correction Kit
SPF3370K2 x Offset Bushings; Approx 0.5 Degree Caster change per bush
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Price:
£199.88
6
Anti-Roll Bar Mount To Chassis Bush
OE bar with flats at bush mounting point
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£47.50
10mm Ball Joint. Minimum length 80mm - maximum length 320mm
Quantity required: 2
Stock: Out of stock
Kit Includes: 1 x Link
Price:
£43.61
Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center
Quantity required: 2
Stock: Out of stock
Kit Includes: 1 x Link
Price:
£57.14
10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm
Quantity required: 1
Stock: Out of stock
Kit Includes: 2 x Links
Price:
£193.54
Do not remove original shell
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes
Price:
£182.16
Toe Control Arm Lower-Inner & Outer Bush Kit
SPF2323KFront Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Price:
£156.68
Control Arm Lower Inner and Outer Bush
SPF2324KRear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes
Price:
£189.92
11
Control Arm Upper-Inner Bush Kit
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Price:
£101.52
1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
Price:
£122.50
12
Control Arm Upper-Outer Bush Kit
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Price:
£101.52
Prefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
Price:
£122.50
13
Anti-Roll Bar Mount To Chassis Bush
OE bar with flats at bush mounting point
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£64.58
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£47.50
Standard Replacement. 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint. Length 76-86mm center to center
Quantity required: 2
Stock: In Stock
Kit Includes: 1 x Link
Please contact us for a price
