1
Front And Rear Suspension Bush Kit
Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Motul Engine Cleaner 300ml
108119It effectively cleans deposits and clogging which appear in the engine over time. The removed microparticles are then removed at the time of the oil drain. It's been specially formulated to provide perfect lubrication during the cleaning process.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Motul 300V Power 5W-30 5L
110815The service fill capacity is 5.8-6.4 litres. Oil filter capacity is 0.3 litres.
For tuned engines and high-performance cars operating over a wide range of rpm and temperatures in severe driving conditions.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Motul Specific Ford WSS M2C 913D 5W-30 5L
104560The service fill capacity is 5.8-6.4 litres. Oil filter capacity is 0.3 litres.
FORD 913D approved engine oil - 100% Synthetic lubricant specially designed for FORD gasoline and diesel engine requiring an approved FORD WSS M2C 913D engine oil. Fully backwards compatible with FORD WSS M2C 913A, FORD WSS M2C 913B, FORD WSS M2C 913C.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Motul 8100 ECO-nergy 5W-30 5L
102898The service fill capacity is 5.8-6.4 litres. Oil filter capacity is 0.3 litres.
FORD WSS-M2C913-D approved oil for use on the Fiesta ST.
Fuel Economy Engine Oil, 100% Synthetic, specially designed for recent engines, powered by Gasoline or Diesel engines, turbocharged or naturally aspirated, indirect or direct injection, requiring the use of a “Fuel Economy” low friction and low HTHS (High-Temperature High-Shear) viscosity oil.
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Engine Front Torque Arm
KDT974The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Quantity required: 1
Stock: In Stock
Price:
£250.97
The insert fits into the voids of the original mounting bush and takes out some of the engine movement under acceleration and deceleration. This results in reduced stress on associated components (such as the exhaust system). Our insert has been caresfully developed to give greater control without introducing Noise, Vibration and Harshness into the cabin. Focus RS and ST Only
Quantity required: 1
Stock: In Stock
Kit Includes: 1 x Polyurethane Bush
Price:
£39.95
Direct replacement upgrade filter for your car's standard airbox.
Quantity required: 1
Stock: Out of stock
Price:
£47.71
Motul DOT 4 LV (Low Viscosity) Brake Fluid 500ml
109434MOTUL DOT 4 LV (Low Viscosity) is especially recommended for use in hydraulic brake and clutch systems of vehicles fitted with ABS (Anti-lock Braking System), ESP (Electronic Stability Program) and ASR (Acceleration Slip Regulation) with a high boiling point and outstanding performance at very low temperatures.
Quantity required: 1
Stock: In Stock
Please contact us for a price
Motul Multi DCTF Dual-Clutch Transmission Fluid 1L
105786Capacity is 1.85-1.95 litres.
MOTUL MULTI DCTF is also suitable for some mechanical gearboxes requiring gear oil with very low viscosity grade at low temperature such as SAE 75W.
Quantity required: 1
Stock: In Stock
Please contact us for a price
Motul Radiator Clean 300ml
108125Motul Radiator Clean effectively removes deposits and clogging that appear in the engine cooling circuit which improves heating and cooling performance. Increases the operational reliability of the cooling system and extends the life span of all components.
The deposits and micro-particles from the cooling system are then removed completely during the coolant drain. Motul Radiator Clean provides the perfect lubrication during the cleaning process of the whole coolant circuit.
Recommended for use in all liquid cooled, closed cooling systems as in passenger cars, commercial vehicles and industrial heat exchangers.
Motul Radiator Clean is designed to be used in all types of Petrol and Diesel engines, naturally aspirated or turbocharged, with or without catalytic converters, using all kinds of fuel.
Quantity required: 1
Stock: In Stock
Please contact us for a price
Motul Auto Cool Optimal -37°C 1L
111051Capacity 7.1 litres.
MOTUL AUTO COOL OPTIMAL -37°C is a ready-to-use long-life cooling liquid based on monoethyleneglycol, using an Organic Acid Technology (OAT) additivation named Organic Tech. Strongly recommended for all cooling systems: Passenger cars, heavy-duty, construction and agriculture vehicles, gardening, ships, stationary engines etc.
Quantity required: 8
Stock: Out of stock
Please contact us for a price
Front and Rear Anti-Roll Bar Upgrade Kit
BFK003Everything you need to 'Activate More Grip'.
Contains BMF51X, BMR78XZ, KLC151 and KLC157.
Engineered to 'Activate More Grip', BFK003 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm front Anti-Roll bar and 24mm 2-point adjustable rear Anti-Roll bar, the kit is completed with high-quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.
Quantity required: 1
Stock: Out of stock
Price:
£779.63
Anti-Lift Kit - Front Wishbone Control arm lower inner rear bushing - Ford/Mazda/Volvo
KCA428Important Notes: Adds +0.5deg caster + Anti-Lift.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.
Quantity required: 1
Stock: In Stock
Price:
£325.22
24mm Extra-Heavy-Duty Front Anti-Roll Bar Upgrade
BMF51XImportant Notes: 24mm - non-adjustable - TUV certified.
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 24mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Quantity required: 1
Stock: In Stock
Price:
£265.84
Adjustable Front Anti-Roll Bar Links
KLC151Suits models with 300mm link - adjustable extra heavy duty.
Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.
Quantity required: 1
Stock: In Stock
Price:
£185.64
Front Steering bump steer correction kit
KCA405Important Notes: Reduces factory toe out from 6mm to 1mm (at 60mm bump)
Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing, it is beneficial to reduce the amount of bump steer to give a more positive feel - sharper handling - reduced rear passive steer, and reduce understeer.
Quantity required: 1
Stock: In Stock
Price:
£53.33
16
Complete Front Control Arm Kit
18mm Ball Joints - Up to Feb 2006
TRC1135This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Stock: In Stock
Price:
£362.24
21mm Ball Joints - After March 2006
TRC1136This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Stock: In Stock
Price:
£362.24
Control Arm Lower-Inner Front Bush Kit
SPF3115K14mm Bolt - ST & RS
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes
Price:
£83.83
18
Control Arm Lower-Inner Rear Bush
Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Price:
£199.88
Standard Alignment Settings with Bracket and Bolts
SPF4653KStandard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Brackets
Price:
£331.54
1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change
Quantity required: 1
Stock: Out of stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes
Price:
£199.88
Performance Alignment Correction Kit
SPF3370K2 x Offset Bushings; Approx 0.5 Degree Caster change per bush
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Price:
£199.88
19
Anti-Roll Bar Mount To Chassis Bush
OE bar with flats at bush mounting point
Quantity required: 1
Stock: Out of stock
Please contact us for a price
Suits 21mm Aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£47.50
24mm Adjustable Rear Anti-Roll Bar
BMR78XZImportant Notes: 24mm - 2 point adjustable - TUV certified
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 24mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Quantity required: 1
Stock: Out of stock
Price:
£280.67
Rear Anti-Roll Bar Link Kit
KLC157Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but most importantly ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.
Quantity required: 1
Stock: Out of stock
Price:
£185.64
Rear - Lower Front Control Arms
KTA137Heavy-duty adjustable alloy rear lower front control arms are designed to allow for increased range with easy on-car toe adjustment. Low-compliance bushings are used to minimise NVH and maximise longevity.
Quantity required: 1
Stock: In Stock
Price:
£384.61
Adjustable Control Arm Upper Rear
KTA138AHeavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.
Quantity required: 1
Stock: Out of stock
Price:
£370.01
Rear Control arms - Lower Front Arms
WA401Important Notes: Supplied as a single arm so you will need to order two. Complete arm fitted with bushings.
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
Quantity required: 2
Stock: Out of stock
Price:
£64.61
Rear Control Arms - Upper Arms
WA402Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market-leading Whiteline synthetic elastomer bushings.
Quantity required: 2
Stock: Out of stock
Price:
£93.12
Do not remove original shell 09/2002-05/2005
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes
Price:
£182.16
Control Arm Lower - Inner & Outer Bush
SPF2323K"Front Arm"
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Price:
£156.68
Control Arm Lower - Inner & Outer Bush
SPF2324K"Rear Arm"
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes
Price:
£189.92
29
Control Arm Upper-Inner and Outer Bush Kit
Standard camber settings
Quantity required: 2
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Price:
£101.52
Camber adjustable -1 to +1 degree adjustment with offsets in both positions
Quantity required: 2
Stock: In Stock
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
Price:
£122.50
Re-use original bolt
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 8 x Washer(s) - used for Steel and / or Polyurethane, 2 x Nuts, 8 x Polyurethane Bushes
Price:
£147.96
31
Anti-Roll Bar Mount To Chassis Bush
OE bar with flats at bush mounting point
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Polyurethane Bushes
Price:
£64.58
Aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes
Price:
£47.50
