Front & Rear Control Arm and Anti-Roll Bar Bush Kit
KIT5189K
Type R Models Only - Kit Includes: 1xSPF2308K, 1xSPF2183-24K, 1xSPF2318K, 1xSPF3195K, 1xSPF2311K, 1xSPF2184-19K
Quantity required: 1
Stock: Out of stock
Price:
£584.42
Type R Models Only - Kit Includes: 1xSPF2308K, 1xSPF2318K, 1xSPF3195K, 1xSPF2311K
Quantity required: 1
Stock: In Stock
Price:
£509.18
To get the most from your Civic Type R, ITG have developed a new cold air intake. The air intake is mounted down behind the bumper, well away from any power robbing heat under the bonnet. Aside from the increase in power, there are improvements with throttle response, torque and an increase in intake noise. The air box is constructed from high quality carbon fibre both reducing weight and providing an aesthetically pleasing look.
Replacement Filter Part No: JC60/78X
Quantity required: 1
Stock: Out of stock
Price:
£597.60
Bump Steer Correction Kit
KCA517
The Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing, reducing the amount of bump steer is beneficial to give a more positive feel - sharper handling - reduced understeer.
Quantity required: 1
Stock: In Stock
Price:
£178.20
Roll Centre Correction Kit
KCA520
A must for lowered vehicles, Whiteline roll centre correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to its potential.
Quantity required: 1
Stock: Out of stock
Price:
£178.19
Fits European-spec EP3 vehicles but not JDM cars or cars fitted with JDM manifold/downpipes.
Quantity required: 1
Stock: In Stock
Price:
£512.33
7
Control Arm Inner-Front & Rear Bush Kit
Retains standard alignment settings
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Steel Tubes, 2 x Sleeves, 1 x Instruction Sheet, 10 x Polyurethane Bushes
Price:
£222.74
Increases caster to increase steering weight, precision and sharpen turn-in.
Quantity required: 1
Stock: In Stock
Kit Includes: 4 x Steel Tubes, 2 x Sleeves, 10 x Polyurethane Bushes
Price:
£245.06
To fit standard 24mm Bar. Measure bar diameter 20,22,23 & 24mm available
Quantity required: 1
Stock: In Stock
Price:
£39.10
24mm Rear Anti-Roll Bar Upgrade
BHR67Z
24mm 2-point adjustable rear anti-roll bar made from solid spring steel with Whiteline's top-quality coating for long life.
3-year warranty and comes with both D-bushes for mounting.
Quantity required: 1
Stock: In Stock
Price:
£280.67
26mm Rear Anti-Roll Bar Upgrade (Motorsport)
BHR67XZ
26mm 3-position adjustable rear anti-roll bar upgrade for motorsport use. Supplied with D-bushes, saddles and lateral locks for secure fitment.
Made from solid spring steel with Whiteline's top-quality coating for long service life. 3-Year / 60,000kms warranty.
Quantity required: 1
Stock: In Stock
Price:
£368.88
Camber-Adjustable Rear Upper Control Arms
KTA333
Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.
Quantity required: 1
Stock: Out of stock
Price:
£363.19
Control Arm Lower-Inner Rear Bush
SPF2318K
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Price:
£86.96
Type R Models - To suit 2x12mm & 2x14mm Diameter bolts
Quantity required: 1
Stock: In Stock
Kit Includes: 8 x Polyurethane Bushes, 4 x Steel Tubes
Price:
£139.94
14
Control Arm Upper-Outer Bush
Standard settings
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Price:
£88.07
Adjustable Camber {Increase or Decrease by 1.75 degrees range}
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes
Price:
£127.73
To fit standard 19mm bar. Measure bar diameter 19, 22 & 24mm available
Quantity required: 1
Stock: In Stock
Price:
£30.76
Fits European-spec EP3 vehicles but not JDM cars
Quantity required: 1
Stock: In Stock
Price:
£461.10
Heavy-Duty Adjustable Anti-Roll Bar Links
TRC1025
10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm
Quantity required: 1
Stock: In Stock
Kit Includes: 2 x Links
Price:
£136.63