Front and Rear

1

Enhancement Bush Kit

KIT0242K
KIT0242K
As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of any vehicle. Having an independent front suspension on this vehicle means the OEM bushes work very hard and durability, reliability and performance are compromised.
With the solid axle rear suspension, the trailing arm bushes stabilise the forward and aft movement of the axle.
As the front bushings wear they allow for the dynamic geometry of the suspension to change causing handling and tyre wear issues.
As the rear bushings wear they can impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of the rear axle; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms.

Kit contains:

  • Front Control Arm Lower Bush Kit
  • Front Control Arm Upper Bush Kit
  • Front Steering Rack & Pinion Mount Bush
  • Rear Panhard Rod Bush Kit
  • Rear Trailing Arm Lower Bush Kit
  • Rear Trailing Arm Upper Bush Kit

Quantity required: 1
Stock: Out of stock

Please contact us for a price

Front

2

Strut Top Spacer Kit

TRC008-6
TRC008-6
Spacer Sleeve, suspension strut mount. Raises vehicle approximately 10-12mm.

Quantity required: 1
Stock: In Stock

Price: £107.48

3

30mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar

RC0059FZ-30
RC0059FZ-30
will not fit KDSS vehiclesSuperPro Roll Control Rear Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.

Upgrading to Roll Control Anti-Roll Bars will:
  • Improve the stability by compensating for the change in centre of gravity of the chassis
  • Neutralise the factory understeer
  • Increase tyre life
  • Control the roll in load carrying and towing applications
  • Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Anti-Roll Bar to get the complete handling upgrade package

Quantity required: 1
Stock: Out of stock

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

Please contact us for a price

4

Control Arm Lower Bush Kit

SPF4051K
SPF4051K
This Kit does both Front & Rear Bushings of the Lower Arm

Quantity required: 1
Stock: Out of stock

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 8 x Washer(s) - used for Steel and / or Polyurethane, 4 x Sleeves

Please contact us for a price

5

Control Arm Lower Complete Assembly Kit - Standard

TRC483
TRC483
Left and Right Arms for Standard Replacement and Repair Upgrade Suits Vehicles without KDSSArms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.

TRC483 - Standard Replacement
  • Two Complete Arm Assemblies
  • All SuperPro Bushings pre-installed
  • Up-rated Ball Joints
  • Improved Quality replacement Camber Bolts

The perfect replacement for your worn ball joints, worn bushes and seized camber pins!

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Arms, 4 x Bolts

Price: £1023.28

6

Control Arm Upper Complete Assembly - Adjustable

TRC480
TRC480
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Key Features
  • Increased articulation, perfect for the off road environment
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings
  • Made in Australia

Quantity required: 1
Stock: Out of stock

Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes

Please contact us for a price

7

Control Arm Upper-Inner Bush Kit

A

Standard Alignment

SPF2845K
SPF2845K
Standard replacement Remove original shell for fitmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. 
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1
Stock: Out of stock

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane

Price: £273.50

B

Double-Offset Alignment Correction

SPF3230K
SPF3230K
Alignment Correction Camber Adjustable 0.5 to 1 Degree of Camber Adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1
Stock: In Stock

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 1 x Instruction Sheet, 4 x Washer(s) - used for Steel and / or Polyurethane

Price: £368.20

8

ReadyStrut Top Caps

RS002
RS002
Strut Cap, Spring Seat, Nuts & Washers

Quantity required: 2
Stock: Out of stock

Kit Includes: 1 x Strut Top Cap

Price: £93.91

9

Steering Rack & Pinion Mount Bush Kit

SPF4056K
SPF4056K

Quantity required: 1
Stock: In Stock

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane

Price: £83.03

10

Anti-Roll Bar Link

TRC4017L
TRC4017L
LHS - Standard Replacement12mm Ball Joint Link

85 Degree opposed

Length 140mm center to center

Quantity required: 1
Stock: In Stock

Kit Includes: 1 x Link

Price: £35.70

11

Anti-Roll Bar Link

TRC4017R
TRC4017R
RHS - Standard Replacement12mm Ball Joint Link

85 Degree opposed

Length 140mm center to center

Quantity required: 1
Stock: In Stock

Kit Includes: 1 x Link

Price: £35.70

12

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC1285L
TRC1285L
12mm Ball Joint Adjustable Link Minimum Length 140 mm - Maximum Length 170 mm Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates Anti-Roll Bar link flex
  • Allows for neutral Anti-Roll Bar positioning
  • Maximises all positions on adjustable Anti-Roll Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1
Stock: Out of stock

Kit Includes: 2 x Links

Price: £182.16

Rear

13

24mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar

RC0059RZ-24
RC0059RZ-24
will not fit KDSS vehicles. SuperPro Roll Control Rear Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.

Upgrading to Roll Control Anti-Roll Bars will:
  • Improve the stability by compensating for the change in centre of gravity of the chassis
  • Neutralise the factory understeer
  • Increase tyre life
  • Control the roll in load carrying and towing applications
  • Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Anti-Roll Bar to get the complete handling upgrade package

Quantity required: 1
Stock: Out of stock

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

Please contact us for a price

14

Panhard Rod Bush Kit

SPF2836K
SPF2836K
Replaces both ends of the bar

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Price: £108.66

15

Anti-Roll Bar Link Kit

A

Standard Replacement

TRC4040
TRC4040
Standard Replacement12mm Ball Joint/Bush Link

128mm center to center

Quantity required: 2
Stock: In Stock

Kit Includes: 1 x Link

Price: £43.46

B

Heavy-Duty Extended

TRC4307
TRC4307
SuperPro Heavy Duty Extended Thread Anti-Roll Bar Links are designed and manufactured to suit lifted Vehicles from 2-8". They are designed to allow you to effectively trim the Anti-Roll Bar Link to your desired length to provide adequate tail shaft clearance and Anti-Roll Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Anti-Roll Bar Links offer increased strength and stud articulation, providing for less stress on the Anti-Roll Bar links during wheel articulation.

Quantity required: 2
Stock: Out of stock

Kit Includes: 1 x Link

Price: £79.69

C

Heavy-Duty Adjustable

TRC1285V
TRC1285V
12mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint

Minimum Length 165 mm - Maximum Length 210 mm Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates Anti-Roll Bar link flex
  • Allows for neutral Anti-Roll Bar positioning
  • Maximises all positions on adjustable Anti-Roll Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Links

Price: £182.16

16

Anti-Roll Bar Mount Bush Kit

A

To Fit 18mm Bar

SPF4059-18K
SPF4059-18K
Suits OE Bar Sizeavailable Sizes 18, 20, 25 & 27mm

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Polyurethane Bushes

Price: £43.50

B

To Fit 20mm Bar

SPF4059-20K
SPF4059-20K
available Sizes 18, 20, 25 & 27mm

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Polyurethane Bushes

Price: £54.58

C

To Fit 25mm Bar

SPF4059-25K
SPF4059-25K
available Sizes 18, 20, 25 & 27mm

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Polyurethane Bushes

Price: £54.58

D

To Fit 27mm Bar

SPF4059-27K
SPF4059-27K
available Sizes 18, 20, 25 & 27mm

Quantity required: 1
Stock: Out of stock

Kit Includes: 2 x Polyurethane Bushes

Price: £70.82

17

Trailing Arm Lower Bush Kit

SPF2461K
SPF2461K

Quantity required: 2
Stock: In Stock

Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes

Price: £106.21

18

Trailing Arm Upper Bush Kit

SPF1760K
SPF1760K
Replaces both ends of the bar

Quantity required: 2
Stock: In Stock

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Price: £105.47